Preparation of cyclodextrin polymer-functionalized polyaniline/MXene composites for high-performance supercapacitor.

Controlled aggregation is of great significance in designing nanodevices with high electrochemical performance. In this study, an in situ aggregation strategy with cyclodextrin polymer (CDP) was employed to prepare polyaniline (PANI)/MXene (MX) composites. MXene served as a two-dimensional structure template. Due to supramolecular interactions, CDP could be controllably modified with PANI layers, effectively preventing the self-polymerization of PANI. As a result, this integration facilitated a more uniform growth of PANI on MXene and further improved the capacitance performance of CDP-MX/PA. In a three-electrode system, the specific capacitance of MX/PA at 1 A g-1 was 460.8 F g-1, which increased to 523.8 F g-1 after CDP-induced growth. CDP-MX/PA exhibited a high energy density of 27.7 W h kg-1 at a power density of 700 W kg-1. This suggests that the synthetic strategy employed in this study holds promise in providing robust support for the preparation of high-performance energy-storage device.

Surface-Reconstructed Ru-Doped Nickel/Iron Oxyhydroxide Arrays for Efficient Oxygen Evolution.

The generation of an active phase through dynamic surface reconstruction is a promising strategy for improving the activity of electrocatalysts. However, studies investigating the reconstruction process and its impact on the intrinsic properties of the catalysts are scarce. Herein, the surface reconstruction of NiFe2 O4 interfaced with NiMoO4 (Ru-NFO/NMO) facilitated by Ru doping is reported. The electrochemical and material characterizations demonstrate that Ru doping can regulate the electronic structure of NFO/NMO and induce the high-valence state of Ni3.6+ δ , facilitating the surface reconstruction to highly active Ru-doped NiFeOOH/NiOOH (SR-Ru-NFO/NMO). The optimized SR-Ru-NFO/NMO exhibits promising performance in the oxygen evolution reaction, displaying a low overpotential of 229 mV at 10 mA cm-2 and good stability at varying current densities for 80 h. Density functional theory calculations indicate that Ru doping can increase the electron density and optimize intermediate adsorption by shifting the d-band center downward. This work provides valuable insights into the tuning of electrocatalysts by surface reconstruction and offers a rational design strategy for the development of highly active oxygen evolution reaction electrocatalysts.

Injectable biocompatible nanocomposites of Prussian blue nanoparticles and bacterial cellulose as a safe and effective photothermal cancer therapy.

Photothermal therapy (PTT) is a novel cancer treatment using a photoabsorber to cause hyperthermia to kill tumors by laser irradiation. Prussian blue nanoparticles (PB NPs) are considered as next-generation photothermal agents due to the facile synthesis and excellent absorption of near-infrared light. Although PB NPs demonstrate remarkable PTT capabilities, their clinical application is limited due to their systemic toxicity. Bacterial cellulose (BC) has been applied to various bio-applications based on its unique properties and biocompatibility. Herein, we design composites with PB NPs and BC as an injectable, highly biocompatible PTT agent (IBC-PB composites). Injectable bacterial cellulose (IBC) is produced through the trituration of BC, with PB NPs synthesized on the IBC surface to prepare IBC-PB composites. IBC-PB composites show in vitro and in vivo photothermal therapeutic effects similar to those of PB NPs but with significantly greater biocompatibility. Specifically, in vitro therapeutic index of IBC-PB composites is 26.5-fold higher than that of PB NPs. Furthermore, unlike PB NPs, IBC-PB composites exhibit no overt toxicity in mice as assessed by blood biochemical analysis and histological images. Hence, it is worth pursuing further research and development of IBC-PB composites as they hold promise as safe and efficacious PTT agents for clinical application.

A densely packed air-stable free-standing film with FeP nanoparticles@C@P-doped reduced graphene oxide for sodium-ion batteries.

Developing a facile strategy which enhances the structural stability and air/moisture stability of transition metal phosphides for practical applications is important but challenging. Herein, we designed a densely packed free-standing film consisting of carbon-coated FeP nanoparticles anchored on P-doped graphene (FeP@C@PG film) through solventless thermal decomposition and the roll-press method. Phytic acid serves a multifunctional role as both a phosphorus source to prepare ultrafine FeP nanoparticles and a protective layer to improve air stability along with hydrophobic graphene and maximize the utilization of phosphide. This structure can enhance electron/ion transport kinetics, allowing for full utilization of active materials, and buffer large volume expansions while preventing pulverization/aggregation during cycling. Noticeably, the densely packed structure can greatly enhance oxidation resistance by effectively blocking the penetration of air/moisture. Therefore, the FeP@C@PG film delivers a stable reversible capacity of 536.6 mA h g-1 after 1000 cycles at 1 A g-1 with good capacity retention, an excellent rate capability of 440.7 mA h g-1 at 5 A g-1, and excellent oxidation stability at 80 °C in air. Furthermore, a pouch-type full-cell exhibits excellent rate/cycling performance and bendability. This study provides a new direction for the rational design and practical applications of advanced P-based materials used in alkali metal-ion batteries.

Ultrafast Synthesis of Graphene-Embedded Cyclodextrin-Metal-Organic Framework for Supramolecular Selective Absorbency and Supercapacitor Performance.

Limited by preparation time and ligand solubility, synthetic protocols for cyclodextrin-based metal-organic framework (CD-MOF), as well as subsequent derived materials with improved stability and properties, still remains a challenge. Herein, an ultrafast, environmentally friendly, and cost-effective microwave method is proposed, which is induced by graphene oxide (GO) to design CD-MOF/GOs. This applicable technique can control the crystal size of CD-MOFs from macro- to nanocrystals. CD-MOF/GOs are investigated as a new type of supramolecular adsorbent. It can selectively adsorb the dye molecule methylene green (MG) owing to the synergistic effect between the hydrophobic nanocavity of CDs, and the abundant O-containing functional groups of GO in the composites. Following high temperature calcination, the resulting N, S co-doped porous carbons derived from CD-MOF/GOs exhibit a high capacitance of 501 F g-1 at 0.5 A g-1 , as well as stable cycling stability with 90.1% capacity retention after 5000 cycles. The porous carbon exhibits good electrochemical performance due to its porous surface containing numerous electrochemically active sites after dye adsorption and carbonization. The design strategy by supramolecular incorporating a variety of active molecules into CD-MOFs optimizes the properties of their derived materials, furthering development toward the fabrication of zeitgeisty and high-performance energy storage devices.

Rapid Synthesis of Oxygen-Enriched Porous Carbon through a Microwave Method and Its Application in Supercapacitors.

In this study, a strategy for the rapid and simple preparation of porous carbon (PC) using the microwave method was proposed. Oxygen-rich PC was synthesized by microwave irradiation in air, where potassium citrate and ZnCl2 served as the carbon source and microwave absorber, respectively. ZnCl2 achieves microwave absorption through dipole rotation, which uses ion conduction to convert heat energy in the reaction system. In addition, potassium salt etching improved the porosity of PCs. The PC prepared under optimal conditions had a large specific surface area (902 m2·g-1) and exhibited a significant specific capacitance (380 F·g-1) in the three-electrode system at 1 A·g-1. The energy and power densities of the assembled symmetrical supercapacitor device based on PC-375W-0.4 were 32.7 W·h·kg-1 and 0.65 kW·kg-1, respectively, at a current density of 1 A·g-1. Even after 5000 cycles at 5 A·g-1 current density, the excellent cycle life retained 94% of its initial capacitance.

In vitro magnetic hyperthermia properties of angle-shaped superparamagnetic iron oxide nanoparticles synthesized by a bromide-assisted polyol method.

Currently, research on superparamagnetic iron oxide nanoparticles (SPIONs) for magnetic hyperthermia applications is steadily increasing. In this work, SPIONs were synthesized by the bromide-assisted polyol method and angle-shaped SPIONs were successfully generated with the optimized concentration of bromide. The influence of bromide concentration on the shape of the generated SPIONs as well as the heating characteristics under an alternating magnetic field (AMF) was thoroughly investigated. At a concentration of 20 mg mL-1 of the angle-shaped SPIONs, the highest temperature curve up to 23 °C was observed under AMF with 140 Oe and 100 kHz for 10 min. With the biotoxicity assay, no significant cytotoxicity was observed in the normal fibroblast of HFB-141103 as well as tumor cells of U87MG and FSall treated with the angle-shaped SPIONs at a concentration below 100 µg mL-1. However, significantly decreased cellular viability was observed in tumor cells of U87MG and FSall treated with 100 µg mL-1 of the angle-shaped SPIONs under AMF with 140 Oe and 100 kHz. Based on these results, it is thought that the angle-shaped SPIONs synthesized by the bromide-assisted polyol method will provide highly efficient magnetic hyperthermia therapy for cancers under biologically safe AMF with 140 Oe and 100 kHz.

Phosphate Capture Enhancement Using Designed Iron Oxide-Based Nanostructures.

Phosphates in high concentrations are harmful pollutants for the environment, and new and cheap solutions are currently needed for phosphate removal from polluted liquid media. Iron oxide nanoparticles show a promising capacity for removing phosphates from polluted media and can be easily separated from polluted media under an external magnetic field. However, they have to display a high surface area allowing high removal pollutant capacity while preserving their magnetic properties. In that context, the reproducible synthesis of magnetic iron oxide raspberry-shaped nanostructures (RSNs) by a modified polyol solvothermal method has been optimized, and the conditions to dope the latter with cobalt, zinc, and aluminum to improve the phosphate adsorption have been determined. These RSNs consist of oriented aggregates of iron oxide nanocrystals, providing a very high saturation magnetization and a superparamagnetic behavior that favor colloidal stability. Finally, the adsorption of phosphates as a function of pH, time, and phosphate concentration has been studied. The undoped and especially aluminum-doped RSNs were demonstrated to be very effective phosphate adsorbents, and they can be extracted from the media by applying a magnet.

Wrapping silicon microparticles by using well-dispersed single-walled carbon nanotubes for the preparation of high-performance lithium-ion battery anode.

Silicon microparticles (SiMPs) show considerable promise as an anode material in high-performance lithium-ion batteries (LIBs) because of their low-cost starting material and high capacity. The failure issues associated with the intrinsically low conductivity and significant volume expansion of Si have largely been resolved by designing silicon/carbon composites using carbon nanotubes (CNTs). The CNTs are important in terms of stress dissipation and the conductive network in Si/CNT composites. Here, we synthesized a SiMP/2D CNT sheet wrapping composite (SiMP/CNT wrapping) via a facile freeze-drying method with the use of highly dispersed single-walled CNTs. In this work, the well-dispersed CNTs are easily mixed with Si, resulting in effective CNT wrapping on the SiMP surface. During freeze-drying, the CNTs are self-assembled into a segregated 2D CNT sheet morphology via van der Waals interactions. The resulting CNT wrapping shows a unique wide range of conductive networks and mesh-like CNT sheets with void spaces. The SiMP/CNT wrapping 9 : 1 electrode exhibits good rate and cycle performance. The first charge/discharge capacity of SiMP/CNT wrapping 9 : 1 is 3160.7 mA h g-1/3469.1 mA h g-1 at 0.1 A g-1 with superior initial coulombic efficiency of 91.11%. After cycling, the SiMP/CNT wrapping electrode shows good structural integrity with preserved electrical conductivity. The superior electrochemical performance of the SiMP/CNT wrapping composite can be explained by an extensive conductive CNT network on the SiMPs and facile lithium-ion diffusion via mesh-like CNT wrapping.

Fabrication and Performance Evaluation of Gelatin/Sodium Alginate Hydrogel-Based Macrophage and MSC Cell-Encapsulated Paracrine System with Potential Application in Wound Healing.

A gelatin/sodium alginate-based hydrogel microsphere has been fabricated after reaction condition optimization. Macrophages (RAW246.7) and adipose mesenchymal stem cells (ADSC) have been subsequently encapsulated in the microsphere in order to construct a 3D paracrine system for wound healing treatment. The synthesized microsphere displayed neglectable cytotoxicity toward both encapsulated cells until 10 days of incubation, indicating promising biocompatibility of the microsphere. A qRT-PCR and ELISA experiment revealed positive regulation of cytokines (Arg-1, IL-6, IL-8, IL-10, bFGF, HGF, VEGF, TLR-1, and CXCL13) expression regarding macrophage phenotype transformation and anti-inflammatory performance both inside the microsphere and in the microenvironment of established in vitro inflammatory model. Additionally, positive tendency of cytokine expression benefit wound healing was more pronounced in a fabricated 3D paracrine system than that of a 2D paracrine system. Furthermore, the 3D paracrine system exhibited more efficiently in the wound healing rate compared to the 2D paracrine system in an in vitro model. These results suggested the current paracrine system could be potentially used as a robust wound healing dressing.

Induction of ferroptosis using functionalized iron-based nanoparticles for anti-cancer therapy.

Ferroptosis, a cell death pathway that is induced in response to iron, has recently attracted remarkable attention given its emerging therapeutic potential in cancer cells. The need for a promising modality to improve chemotherapy's efficacy through this pathway has been urgent in recent years, and this non-apoptotic cell death pathway accumulates reactive oxygen species (ROS) and is subsequently involved in lipid peroxidation. Here, we report cancer-targeting nanoparticles that possess highly efficient cancer-targeting ability and minimal systemic toxicity, thereby leading to ferroptosis. To overcome the limit of actual clinical application, which is the ultimate goal due to safety issues, we designed safe nanoparticles that can be applied clinically. Nanoparticles containing ferroptosis-dependent iron and FDA-approved hyaluronic acid (FHA NPs) are fabricated by controlling physicochemical properties, and the FHA NPs specifically induce ROS production and lipid peroxidation in cancer cells without affecting normal cells. The excellent in vivo anti-tumor therapeutic effect of FHA NPs was confirmed in the A549 tumor-bearing mice model, indicating that the induction of FHA NP-mediated cell death via the ferroptosis pathway could serve as a powerful platform in anticancer therapy. We believe that this newly proposed FHA NP-induced ferroptosis strategy is a promising system that offers the potential for efficient cancer treatment and provides insight into the safe design of nanomedicines for clinical applications.

Supramolecular Design Strategy of a Water-Soluble Diphenylguanidine-Cyclodextrin Polymer Inclusion Complex.

Diphenylguanidine (DPG) is a widely used secondary accelerator for the vulcanization of natural rubber (NR) latex. However, its low water solubility and high toxicity limit its use in high-end NR products. In this study, a water-soluble inclusion complex of DPG and a ß-cyclodextrin polymer (ß-CDP), termed DPG-ß-CDP, was prepared through supramolecular interactions and characterized using Fourier-transform infrared spectroscopy, 1H NMR, scanning electron microscopy, and UV-vis spectroscopy techniques. In comparison with that of DPG, the water solubility of DPG-ß-CDP was greatly enhanced because of the water-soluble host molecule. The molar ratio of DPG to the CD unit in ß-CDP was determined to be 1:1. At 25 °C, the binding constant of DPG-ß-CDP was found to be 9.2 × 105 L/mol by UV-vis spectroscopy. The proposed method for forming inclusion complexes with high potential for use as water-soluble vulcanization accelerators is promising.

Design Strategy for Vulcanization Accelerator of Diphenylguanidine/Cyclodextrin Inclusion Complex for Natural Rubber Latex Foam with Enhancing Performance.

Vulcanization is an essential process to obtain high-performance rubber products. Diphenylguanidine (DPG) is often used as the secondary accelerator in the vulcanization process of natural rubber (NR) latex. However, DPG would make NR latex emulsion exhibit gelation, resulting in the negative vulcanization efficiency. In addition, exposure to DPG might lead to some physiological diseases during the production process of DPG doped NR latex. Hydroxypropyl-ß-cyclodextrin (HP-ß-CD) with the hydrophobic interior and hydrophilic exterior has the advantages of good water solubility, high bioavailability, reliable stability, and low toxicity. In this study, the inclusion complex of diphenylguanidine-hydroxypropyl-ß-cyclodextrin (DPG-HP-ß-CD) is prepared by ball milling with a host-guest molar ratio of 1 : 1, which has also been applied to the foaming process of NR latex. The mechanical properties of DPG-HP-ß-CD inclusion complex/natural rubber latex foam (DPG-HP-ß-CD/NRLF) have been significantly improved, including the tensile strength, elongation at break, hardness, compression set, resilience, and antiaging performance. Further, the usage of DPG has been reduced, leading to the reduction of toxicity and environmental hazards.

Design strategies for adhesive hydrogels with natural antibacterial agents as wound dressings: Status and trends.

The wound healing process is usually susceptible to different bacterial infections due to the complex physiological environment, which significantly impairs wound healing. The topical application of antibiotics is not desirable for wound healing because the excessive use of antibiotics might cause bacteria to develop resistance and even the production of super bacteria, posing significant harm to human well-being. Wound dressings based on adhesive, biocompatible, and multi-functional hydrogels with natural antibacterial agents have been widely recognized as effective wound treatments. Hydrogels, which are three-dimensional (3D) polymer networks cross-linked through physical interactions or covalent bonds, are promising for topical antibacterial applications because of their excellent adhesion, antibacterial properties, and biocompatibility. To further improve the healing performance of hydrogels, various modification methods have been developed with superior biocompatibility, antibacterial activity, mechanical properties, and wound repair capabilities. This review summarizes hundreds of typical studies on various ingredients, preparation methods, antibacterial mechanisms, and internal antibacterial factors to understand adhesive hydrogels with natural antibacterial agents for wound dressings. Additionally, we provide prospects for adhesive and antibacterial hydrogels in biomedical applications and clinical research.

Nitrogen and Sulfur Codoped Porous Carbon Directly Derived from Potassium Citrate and Thiourea for High-Performance Supercapacitors.

By introducing a heteroatom into carbon material, an effective improvement in capacitance can be realized owing to surface oxidation and reduction reactions of pseudocapacitors. Herein, a simple one-pot carbonization activation method was proposed to convert potassium citrate into three-dimensional interconnected porous carbon (PC). Then, an effective double heteroatom doping method by thiourea was used to prepare nitrogen-sulfur-doped PC (N,S-PC). This porous structure facilitates the storage of a large number of ions and reduces their diffusion path. The synthesized N,S-PC nanomaterial has a capacitance of 674 F/g at 1 A/g in a 1 M H2SO4 electrolyte, can retain 94.41% of the initial capacitance after 10 000 cycles at 5 A/g, and has a long cycle life. More importantly, a symmetric supercapacitor assembled with this material can exhibit an energy density of up to 32.6 (W·h)/kg at a high-power density of 750 W/kg. This is due to the high performance of N,S-PC in supercapacitor electrode materials.

An expanded sandwich-like heterostructure with thin FeP nanosheets@graphene via charge-driven self-assembly as high-performance anodes for sodium ion battery.

In this work, we simply fabricate a novel expanded sandwich-like heterostructure of iron-phosphide nanosheets in between reduced graphene oxide (expanded FeP NSs@rGO) with a high ratio of FeP/Fe-POx and an expanded structure via a charge-driven self-assembly method by exploiting polystyrene beads (PSBs) as a sacrificial template. In such a design, even after the decomposition of PSBs during the annealing process, the PSBs successfully provide ample space between the nanosheets, enabling a structure with long-term stability and high ionic conductivity. Importantly, the PSBs are decomposed and simultaneously reacted with oxidized iron-phosphide (Fe-POx) on the surface of the nanosheets to reduce into FeP. As a result, the expanded FeP NSs@rGO results in a high content of FeP (52.3%) and remarkable electrochemical performances when it is used for sodium-ion battery anodes. The expanded FeP NSs@rGO exhibits a high capacity of 916.1 mA h g-1 at 0.1 A g-1, a superior rate capability of 440.9 mA h g-1 at 5 A g-1, and a long-term cycling stability of 85.4% capacity retention after 1000 cycles at 1 A g-1. In addition, the full cell also exhibits excellent capacity, rate capability, and cycling stability. This study clearly demonstrates that an increase in FeP proportion is directly related to an increase in capacity. This facile method of synthesizing rationally designed heterostructures is expected to provide a novel strategy to create nanostructures for advanced energy storage applications.

Facile and scaleable transformation of Cu nanoparticles into high aspect ratio Cu oxide nanowires in methanol.

In this work, a facile synthetic route for the preparation of high aspect ratio Cu oxide nanowires is reported. The preparation of the Cu oxide nanowires begins with the generation of pure Cu nanoparticles by inert gas condensation (IGC) method, follows by dispersing the obtained nanoparticles in methanol with the aid of ultrasonication. The mixture is stored at different temperature for the transformation from Cu nanoparticle to Cu oxide nanowires. The influences of the kind of solution, the ratio of methanol to Cu nanoparticle, dispersion time and temperature towards the generation of Cu oxide nanowires are studied in detail. Scanning electron microscopy studies indicate that high aspect ratio Cu oxide nanowires with diameter of a few tens of nanometers and length up to several tens of micrometers could be obtained under proper conditions. The mechanism for the transformation of Cu nanoparticles to Cu oxide nanowires is also investigated.

A Facile Route for the Preparation of Monodisperse Iron nitride at Silica Core/shell Nanostructures.

Uniform-sized iron oxide nanoparticles obtained from the solution phase thermal decomposition of the iron-oleate complex were encapsulated inside the silica shell by the reverse microemulsion technique, and then thermal treatment under NH3 to transfer the iron oxide to iron nitride. The transmission electron microscopy images distinctly demonstrated that the as-prepared iron nitride at silica core/shell nanostructures were highly uniform in particle-size distribution. By using iron oxide nanoparticles of 6.1, 10.3, 16.2, and 21.8 nm as starting materials, iron nitride nanoparticles with average diameters of 5.6, 9.3, 11.6, and 16.7 nm were produced, respectively. The acid-resistant properties of the iron nitride at silica core/shell nanostructures were found to be much higher than the starting iron oxide at silica. A superconducting quantum interference device was used for the magnetic characterization of the nanostructure. Besides, magnetic resonance imaging (MRI) studies using iron nitride at silica nanocomposites as contrast agents demonstrated T 2 enhanced effects that were dependent on the concentration. These core/shell nanostructures have enormous potential in magnetic nanodevice and biomedical applications. The current process is expected to be easy for large-scale and transfer other metal oxide nanoparticles.

Polyaniline-Encapsulated Hollow Co-Fe Prussian Blue Analogue Nanocubes Modified on a Polypropylene Separator To Improve the Performance of Lithium-Sulfur Batteries.

Recent studies of lithium-sulfur (Li-S) batteries have identified that a modified separator plays a critical role in challenging the capacity fading and shuttle effect of lithium polysulfides (LiPSs). Herein, we report a polyaniline-encapsulated hollow Co-Fe Prussian blue analogue (CFP@PANI) for separator modification. The open frame-like hollow CFP was synthesized via oriented attachment (OA). To improve the catalytic effect and electrical conductivity, PANI was coated on the synthesized CFP. The resulting CFP@PANI was applied on the conventional polypropylene (PP) separator (CFP@PANI-PP) with vacuum filtration. With a ketjen black/sulfur (KB/S) cathode with 66% of the sulfur load, the CFP@PANI-PP exhibited an initial capacity of 723.1 mAh g-1 at a current density of 1 A g-1. Furthermore, the CFP@PANI-PP showed stable cycling performance with 83.5% capacity retention after 100 cycles at 1 A g-1. During the 100 cycles, each cycle maintained high coulombic efficiency above 99.5%, which indicates that the CFP@PANI-PP could inhibit LiPS migration to the anode side without a Li+ transport disturbance across the separator. Overall, the CFP@PANI-PP efficiently suppressed LiPSs, resulting in enhanced electrochemical performance. The current study provides useful insight into designing a nanostructure for separator modification of Li-S batteries.

Recent Development of Flexible and Stretchable Supercapacitors Using Transition Metal Compounds as Electrode Materials.

Flexible and stretchable supercapacitors (FS-SCs) are promising energy storage devices for wearable electronics due to their versatile flexibility/stretchability, long cycle life, high power density, and safety. Transition metal compounds (TMCs) can deliver a high capacitance and energy density when applied as pseudocapacitive or battery-like electrode materials owing to their large theoretical capacitance and faradaic charge-storage mechanism. The recent development of TMCs (metal oxides/hydroxides, phosphides, sulfides, nitrides, and selenides) as electrode materials for FS-SCs are discussed here. First, fundamental energy-storage mechanisms of distinct TMCs, various flexible and stretchable substrates, and electrolytes for FS-SCs are presented. Then, the electrochemical performance and features of TMC-based electrodes for FS-SCs are categorically analyzed. The gravimetric, areal, and volumetric energy density of SC using TMC electrodes are summarized in Ragone plots. More importantly, several recent design strategies for achieving high-performance TMC-based electrodes are highlighted, including material composition, current collector design, nanostructure design, doping/intercalation, defect engineering, phase control, valence tuning, and surface coating. Integrated systems that combine wearable electronics with FS-SCs are introduced. Finally, a summary and outlook on TMCs as electrodes for FS-SCs are provided.